Configuring The Udp Echo Operation - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Step

Configuring the UDP echo operation

The UDP echo operation measures the round-trip time between the client and a UDP port on the
NQA server.
The UDP echo operation requires both the NQA server and the NQA client. Before you perform a
UDP echo operation, configure a UDP listening service on the NQA server. For more information
about the UDP listening service configuration, see
To configure the UDP echo operation:
Step
1. Enter system view.
2. Create an NQA operation
and enter NQA operation
view.
3. Specify the UDP echo type
and enter its view.
4. Specify
address of UDP packets.
5. Specify the destination port
of UDP packets.
6. (Optional.) Set the payload
size for each UDP packet.
7. (Optional.)
payload fill string for UDP
packets.
8. (Optional.)
source port of UDP packets.
9. (Optional.)
source IP address of UDP
packets.
Command
Command
system-view
nqa
operation-tag
type udp-echo
the destination
destination ip ip-address
destination port port-number
data-size size
Specify the
data-fill string
Specify the
source port port-number
Specify the
source ip ip-address
Remarks
TCP packets can be sent out.
"Configuring the NQA
entry admin-name
103
server."
Remarks
N/A
By default, no NQA operations exist.
N/A
By default, no destination
address is specified.
The destination address must be the
same as the IP address of the
listening service configured on the
NQA server.
By default, no destination port
number is specified.
The destination port number must
be the same as the port number of
the listening service on the NQA
server.
The default setting is 100 bytes.
The default payload fill string is the
hexadecimal
00010203040506070809.
By default, no source port number is
specified.
By default, the packets take the
primary IP address of the output
interface as their source IP address.
The source IP address must be the
IP address of a local interface, and
the interface must be up. Otherwise,
no UDP packets can be sent out.
IP
number