Ftp Operation Configuration Example - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

[DeviceA] nqa schedule admin test1 start-time now lifetime forever
# After the DNS operation runs for a period of time, stop the operation.
[DeviceA] undo nqa schedule admin test1
# Display the most recent result of the DNS operation.
[DeviceA] display nqa result admin test1
NQA entry (admin admin, tag test1) test results:
Send operation times: 1
Min/Max/Average round trip time: 62/62/62
Square-Sum of round trip time: 3844
Last succeeded probe time: 2011-11-10 10:49:37.3
Extended results:
Packet loss ratio: 0%
Failures due to timeout: 0
Failures due to internal error: 0
Failures due to other errors: 0
# Display the history records of the DNS operation.
[DeviceA] display nqa history admin test1
NQA entry (admin admin, tag test) history records:
Index
1
The output shows that it took Device A 62 milliseconds to translate domain name host.com into an
IP address.

FTP operation configuration example

Network requirements
As shown in
file to the FTP server. The login username and password are admin and systemtest, respectively.
The file to be transferred to the FTP server is config.txt.
Figure 40 Network diagram
NQA client
10.1.1.1/16
Device A
Configuration procedure
# Assign IP addresses to interfaces, as shown in
# Configure static routes or a routing protocol to make sure the devices can reach each other.
(Details not shown.)
# Create an FTP operation.
<DeviceA> system-view
[DeviceA] nqa entry admin test1
[DeviceA-nqa-admin-test1] type ftp
# Specify the URL of the FTP server.
[DeviceA-nqa-admin-test-ftp] url ftp://10.2.2.2
# Specify 10.1.1.1 as the source IP address.
Response Status
62 Succeeded
Figure 40, configure an FTP operation to test the time required for Device A to upload a
10.2.2.2/16
IP network
Receive response times: 1
Time
2011-11-10 10:49:37.3
FTP server
Device B
Figure 40. (Details not shown.)
131