HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual page 290

Operation Description
Replaces the specified target.
•
•
edit-config:
replace
•
Removes
configuration.
•
•
edit-config:
remove
•
Deletes
configuration.
•
•
edit-config: delete
•
Modifies
edit-config:
configuration of the device
default-operation
using the default operation
If the specified target
exists, the operation
replaces the configuration
of the target with the
configuration carried in the
message.
If the specified target does
not exist but is allowed to
be created, create the
target and then apply the
configuration of the target.
If the specified target does
not exist and is not
allowed to be created, the
operation is not conducted
and an invalid-value error
message is returned.
the specified
If the specified target has
only the table index, the
operation removes all
configuration of the
specified target, and the
target itself.
If the specified target has
the table index and
configuration data, the
operation removes the
specified configuration
data of this target.
If the specified target does
not exist, or the XML
message does not specify
any target, a success
message is returned.
the specified
If the specified target has
only the table index, the
operation removes all
configuration of the
specified target, and the
target itself.
If the specified target has
the table index and
configuration data, the
operation removes the
specified configuration
data of this target.
If the specified target does
not exist, an error
message is returned,
showing that the target
does not exist.
the current
281
XML example
The syntax is the same as the edit-config message
with the merge attribute. Change the operation
attribute from merge to replace.
The syntax is the same as the edit-config message
with the merge attribute. Change the operation
attribute from merge to remove.
The syntax is the same as the edit-config message
with the merge attribute. Change the operation
attribute from merge to delete.
To issue an empty operation for schema verification
purposes: