Applying A Qos Policy To A Vlan; Applying A Qos Policy Globally; Applying A Qos Policy To The Control Plane - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

The device does not support mirroring outbound traffic of aggregate interfaces.
To apply a QoS policy to an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Apply a policy to the interface.

Applying a QoS policy to a VLAN

You can apply a QoS policy to a VLAN to mirror the traffic in the inbound direction on all ports in the
VLAN.
To apply the QoS policy to a VLAN:
Step
1. Enter system view.
2. Apply a QoS policy to a VLAN.

Applying a QoS policy globally

You can apply a QoS policy globally to mirror the traffic in the inbound direction on all ports.
To apply a QoS policy globally:
Step
1. Enter system view.
2. Apply a QoS policy globally.

Applying a QoS policy to the control plane

You can apply a QoS policy to the control plane to mirror the traffic in the specified direction on all
ports of the control plane.
To apply a QoS policy to the control plane:
Step
1. Enter system view.
2. Enter control plane view.
3. Apply a QoS policy to the
control plane.
Command
system-view
interface interface-type interface-number
qos apply policy policy-name { inbound | outbound }
Command
system-view
qos vlan-policy policy-name vlan vlan-id-list inbound
Command
system-view
qos apply policy policy-name global inbound
Command
system-view
control-plane slot slot-number
qos apply policy policy-name inbound
180