HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual page 180

Figure 63 Network diagram
Marketing Dept.
Technical Dept.
Configuration procedure
# Create local mirroring group 1.
<Device> system-view
[Device] mirroring-group 1 local
# Configure GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 as source ports for local mirroring group
1.
[Device] mirroring-group 1 mirroring-port gigabitethernet 1/0/1 gigabitethernet 1/0/2
both
# Configure GigabitEthernet 1/0/3 as the monitor port for local mirroring group 1.
[Device] mirroring-group 1 monitor-port gigabitethernet 1/0/3
# Disable the spanning tree feature on the monitor port GigabitEthernet 1/0/3.
[Device] interface gigabitethernet 1/0/3
[Device-GigabitEthernet1/0/3] undo stp enable
[Device-GigabitEthernet1/0/3] quit
Verifying the configuration
# Display information about all mirroring groups.
[Device] display mirroring-group all
Mirroring group 1:
Type: Local
Status: Active
Mirroring port:
GigabitEthernet1/0/1
GigabitEthernet1/0/2
Monitor port: GigabitEthernet1/0/3
The output shows that you can monitor all packets received and sent by the Marketing department
and the Technical department on the server.
GE1/0/1
GE1/0/3
Device
GE1/0/2 Server
Source port
Monitor port
Both
Both
171