Configuring The Https Template - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Step
11. (Optional.) Specify the source
IP address for the probe
packets.
12. (Optional.)
expected status codes.
13. (Optional.)
expected data.

Configuring the HTTPS template

IMPORTANT:
This feature is available in Release 1121 and later.
A feature that uses the HTTPS template performs the HTTPS operation to measure the time it takes
for the NQA client to obtain data from an HTTPS server.
The expected data is checked only when the expected data is configured and the HTTPS response
contains the Content-Length field in the HTTPS header.
The status code of the HTTPS packet is a three-digit field in decimal notation, and it includes the
status information for the HTTPS server. The first digit defines the class of response.
Before you perform the HTTPS operation, configure the HTTPS server and the SSL client policy for
the SSL client. For information about configuring SSL client policies, see Security Configuration
Guide.
To configure the HTTPS template:
Step
1. Enter system view.
2. Create an HTTPS template
and enter its view.
3. Specify
destination HTTPS server.
4. Specify
username.
5. Specify
password.
6. Specify an SSL client policy.
7. (Optional.) Specify the HTTPS
version.
Command
•
•
Configure the
expect status status-list
Configure the
expect data
[ offset number ]
Command
system-view
nqa template https name
the URL of the
url url
an HTTPS login
username username
an HTTPS login
password
simple } string
ssl-client-policy
policy-name
version { v1.0 | v1.1 }
IPv4 address:
source ip ip-address
IPv6 address:
source ipv6
ipv6-address
expression
{ cipher |
121
Remarks
before it returns to HTTP template
view.
By default, the packets take the
primary IP address of the output
interface as their source IP address.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
probe packets can be sent out.
By default, no expected status code is
configured.
By default, no expected data is
configured.
Remarks
N/A
By default, no HTTPS templates exist.
By default, no URL is specified for the
destination HTTPS server.
Enter the URL in one of the following
formats:
•
https://host/resource.
•
https://host:port/resource.
By default, no HTTPS login username
is specified.
By default, no HTTPS login password is
specified.
By default, no SSL client policy is
specified.
By default, HTTPS 1.0 is used.