Returning To The Cli - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

<ok/>
</rpc-reply>

Returning to the CLI

To return from XML view to the CLI, send the following close-session request:
<?xml version="1.0"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<close-session/>
</rpc>
When the device receives the close-session request, it sends the following response and returns to
CLI's user view:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="101"
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<ok/>
</rpc-reply>
277