Configuring The Nqa Statistics Collection Feature; Configuring The Saving Of Nqa History Records - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Configuring the NQA statistics collection feature

NQA forms statistics within the same collection interval as a statistics group. To display information
about the statistics groups, use the display nqa statistics command.
If you use the frequency command to set the interval to 0 milliseconds for an NQA operation, NQA
does not generate any statistics group for the operation.
To configure the NQA statistics collection feature:
Step
1. Enter system view.
2. Create an NQA operation
and enter NQA operation
view.
3. Specify an NQA operation
type and enter its view.
4. (Optional.) Set the interval
for collecting the statistics.
5. (Optional.) Set the maximum
number of statistics groups
that can be saved.
6. (Optional.) Set the hold time
of statistics groups.

Configuring the saving of NQA history records

Step
1. Enter system view.
2. Create
operation
NQA operation view.
3. Enter NQA operation
type view.
4. Enable the saving of
history records for the
NQA operation.
5. (Optional.)
lifetime
records.
Command
system-view
nqa
operation-tag
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | icmp-jitter |
path-jitter
udp-echo | udp-jitter | voice }
statistics interval interval
statistics max-group number
statistics hold-time hold-time
Command
system-view
an NQA
and enter
nqa entry admin-name operation-tag
type { dhcp | dlsw | dns | ftp | http |
icmp-echo | snmp | tcp | udp-echo |
udp-tracert }
history-record enable
Set the
of history
history-record keep-time keep-time
entry admin-name
| snmp | tcp |
113
Remarks
N/A
By default, no NQA operations
exist.
The NQA statistics collection
feature is not available for the
UDP tracert operation.
The default setting is 60 minutes.
The default setting is two groups.
To disable the NQA statistics
collection feature, set
maximum number to 0.
When the maximum number of
statistics groups is reached, to
save a new statistics group, the
oldest statistics group is deleted.
The default setting is 120 minutes.
A statistics group is deleted when
its hold time expires.
Remarks
N/A
By default, no NQA operations
exist.
The history record
feature is not available for the
ICMP jitter, UDP jitter, path
jitter, or voice operations.
By default, this feature is
enabled only for the UDP
tracert operation.
The default setting is 120
minutes.
A record is deleted when its
lifetime is reached.
the
saving