Performing Basic Tasks; Saving The Configuration; Displaying Or Modifying Settings Of A Table Entry - HPE OfficeConnect 1950 Series User Manual

Icon/button
Entry management
icons
Advanced settings
icon

Performing basic tasks

This section describes the basic tasks that must be frequently performed when you configure or
manage the device.

Saving the configuration

Typically, settings take effect immediately after you create them. However, the system does not
automatically save the settings to the configuration file. They are lost when the device reboots.
To prevent settings from being lost, use one of the following methods to save the configuration:
•
Click the Save icon
•
Select Device > Maintenance > Configuration to access the configuration management
page.

Displaying or modifying settings of a table entry

1. Hover over the entry.
2. Click the Detail icon
Icon/button
Task
name
Click this icon, and then enter a combination of criteria to
Advanced search
perform an advanced search.
Refresh Refresh table entries manually.
•
•
Add
Display or modify settings of an entry.
Detail
This icon appears at the end of an entry when you hover
over the entry.
Delete an entry.
Delete
This icon appears at the end of an entry when you hover
over the entry.
Select one or multiple entries, and then click this icon to
Bulk-delete
delete the selected entries.
Field selector Select fields to be displayed.
Advanced settings Access the configuration page to configure settings.
in the left corner.
at the end of the entry.
9
Add a new entry.
Confirm the addition of an entry and continue to add an
additional entry.