Layer 3 Remote Port Mirroring Configuration Example - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

Hide thumbs Also See for FlexNetwork 5510 HI Series:
Table of Contents

Advertisement

[DeviceA] mirroring-group 1 reflector-port gigabitethernet 1/0/5
This operation may delete all settings made on the interface. Continue? [Y/N]:y
# Create VLAN 10, and assign ports GigabitEthernet 1/0/11 through GigabitEthernet 1/0/13 to VLAN
10.
[DeviceA] vlan 10
[DeviceA-vlan10] port gigabitethernet 1/0/11 to gigabitethernet 1/0/13
[DeviceA-vlan10] quit
# Configure VLAN 10 as the remote probe VLAN of the remote source group.
[DeviceA] mirroring-group 1 remote-probe vlan 10

Layer 3 remote port mirroring configuration example

Network requirements
As shown in
bidirectional traffic of the Marketing department.
Figure 66 Network diagram
Source
device
Device A
GE1/0/3
GE1/0/1
10.1.1.1/24
Marketing
dept.
Configuration procedure
1.
Configure IP addresses for the tunnel interfaces and related ports on the devices. (Details not
shown.)
2.
Configure Device A (the source device):
# Create service loopback group 1, and specify the tunnel service for the group.
<DeviceA> system-view
[DeviceA] service-loopback group 1 type tunnel
# Assign GigabitEthernet 1/0/3 to service loopback group 1.
[DeviceA] interface gigabitethernet 1/0/3
[DeviceA-GigabitEthernet1/0/3] port service-loopback group 1
All configurations on the interface will be lost. Continue?[Y/N]:y
[DeviceA-GigabitEthernet1/0/3] quit
# Create tunnel interface Tunnel 0 that operates in GRE mode, and configure an IP address
and subnet mask for the interface.
[DeviceA] interface tunnel 0 mode gre
[DeviceA-Tunnel0] ip address 50.1.1.1 24
# Configure source and destination IP addresses for Tunnel 0.
Figure
66, configure Layer 3 remote port mirroring so the server can monitor the
GE1/0/2
GE1/0/1
20.1.1.1/24
20.1.1.2/24
Tunnel0
50.1.1.1/24
Common port
Service loopback interface
Intermediate
device
Device B
GE1/0/2
30.1.1.1/24
GRE tunnel
Source port
Monitor port
175
Destination
device
Device C
GE1/0/1
30.1.1.2/24
GE1/0/3
GE1/0/2
40.1.1.1/24
Tunnel0
50.1.1.2/24
Server

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents