Performing Cli Operations Through Netconf; Configuration Procedure; Cli Operation Example - HPE FlexNetwork 5510 HI Series Network Management And Monitoring Configuration Manual

</top>
</data>
</rpc-reply>

Performing CLI operations through NETCONF

You can enclose command lines in XML messages to configure the device.

Configuration procedure

# Copy the following text to the client to execute the commands:
<?xml version="1.0" encoding="UTF-8"?>
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<CLI>
<Execution>
Commands
</Execution>
</CLI>
</rpc>
The <Execution> element can contain multiple commands, with one command on one line.
After receiving the CLI operation request, the device returns a response in the following format if the
CLI operation is successful:
<?xml version="1.0" encoding="UTF-8"?>
<rpc-reply message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<CLI>
<Execution>
<![CDATA[Responses to the commands]]>
</Execution>
</CLI>
</rpc-reply>

CLI operation example

Configuration requirements
Send the display current-configuration command to the device.
Configuration procedure
# Enter XML view.
<Sysname> xml
# Exchange capabilities.
<Name>NULL0</Name>
</Interface>
<Interface>
<IfIndex>7243</IfIndex>
<Name>Register-Tunnel0</Name>
</Interface>
</Interfaces>
</Ifmgr>
273