Configuring The Udp Echo Operation - HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual

The TCP operation requires both the NQA server and the NQA client. Before you perform a TCP
operation, configure a TCP listening service on the NQA server. For more information about the TCP
listening service configuration, see
To configure the TCP operation:
Step
1. Enter system view.
2. Create an NQA operation
and enter NQA operation
view.
3. Specify the TCP type and
enter its view.
4. Specify the destination
address of TCP packets.
5. Specify the destination port
of TCP packets.
6. (Optional.) Specify the
source IP address of TCP
packets.

Configuring the UDP echo operation

The UDP echo operation measures the round-trip time between the client and a UDP port on the
NQA server.
The UDP echo operation requires both the NQA server and the NQA client. Before you perform a
UDP echo operation, configure a UDP listening service on the NQA server. For more information
about the UDP listening service configuration, see
To configure the UDP echo operation:
Step
1. Enter system view.
2. Create an NQA operation
and enter NQA operation
view.
3. Specify the UDP echo type
and enter its view.
4. Specify the destination
address of UDP packets.
"Configuring the NQA
Command
system-view
nqa entry admin-name
operation-tag
type tcp
destination ip ip-address
destination port port-number
source ip ip-address
"Configuring the NQA
Command
system-view
nqa entry admin-name
operation-tag
type udp-echo
destination ip ip-address
118
server."
Remarks
N/A
By default, no NQA operation is
created.
N/A
By default, no destination IP address
is specified.
The destination address must be the
same as the IP address of the
listening service configured on the
NQA server.
By default, no destination port number
is configured.
The destination port number must be
the same as the port number of the
listening service on the NQA server.
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no
TCP packets can be sent out.
server."
Remarks
N/A
By default, no NQA operation is
created.
N/A
By default, no destination IP
address is specified.
The destination address must be the
same as the IP address of the
listening service configured on the