Ground The Product; Line Power And Fuse; Replace The Fuses - Fluke Calibration 5322A Operator's Manual

5322A
Operators Manual
Number



D
E

Ground the Product

The Product enclosure must be grounded through the grounding conductor of the
power cord, or through the rear-panel ground binding post. See Rear-Panel
Features.

Line Power and Fuse

The line power receptacle and the fuse are located on the rear of the Product.
See Rear-Panel Features. Use only the fuse recommended by Fluke Calibration.

Replace the Fuses

The Product uses fuses to protect both the line power input and measurement
inputs. Refer to Rear-Panel Features and Operators Maintenance for instructions
on replacing the Product fuses.
12
Table 4. Available Mains Power Cord Types
Type
North America/Japan
Universal Euro
United Kingdom
Australia/China
South Africa/India
Fluke Calibration Part
Voltage
100 V/120 V 2743310
240 V 2743331
240 V 2743322
240 V 2743346
240 V 2743354
ehq050.eps
Number