Fluke Calibration 5322A Operator's Manual page 122

5322A
Operators Manual
[SOUR]:SAF:LRES:CURR?
Description: This command returns the measured current flowing through the
Query:
[SOUR]:SAF:LRES[:CURR]:LIM?
Description: This command returns the maximum allowed value of current
Query:
[SOUR]:SAF:LRES[:CURR]:MAX?
Description: This command returns the maximum (peak) value of current flowing
Query:
[SOUR]:SAF:LRES[:CURR]:CLE
Description: Clears the maximum (peak) value of current flowing through the
Example:
[SOUR]:SAF:LRF(?)
Description: This If not already selected, this command switches the Product
Parameters: <DNPD>
Example:
Query:
114
resistance. The Product returns the current value using exponential
format. Example: 100 mA is returned as 100e-03. If not already
selected, this command switches the Product to the Low-
Resistance mode (function Resistance).
SAF:LRES:CURR?
flowing through the resistance. The Product returns the current
value using exponential format. Example: 100 mA is returned as
100e-03. If not already selected, this command switches the
Product to the Low-Resistance mode (function Resistance).
SAF:LRES:LIM?
through the selected resistance. Maximum value can be cleared
using the command SAF:LRES:CLEar. If not already selected, this
command switches the Product to the Low-Resistance mode
(function Resistance).
The Product returns the current value using exponential format.
Example: 100 mA is returned as 100e-03.
SAF:LRES:MAX?
selected resistance. If not already selected, this command switches
the Product to the Low-Resistance mode (function Resistance).
SAF:LRES:CLE
into the Low-Resistance mode (function 10mOhm).
Parameter represents the value of the resistance
expressed in Ohms. See the Specifications
(found online at www.Flukecal.com) for
acceptable ranges.
SAF:HRF 100GΩ fix resistance mode
SAF:LRF?