Table of Contents
Advertisement
14.1. KBox C-102-0 - System Expansion Capabilities
Please observe that the KBox C-102-0 can be equipped with only one internal 2.5" SATA
HDD/SSD.
No external accessible removable drive bay and PCIe slot are available on the front side.
Refer also to the subsection 4.4.
For system design refer also to Figure 64, Figure 65, chapter 16/ "Technical Specifications"
and subsection 16.1.7 "Mechanical Specifications of the KBox C-102-0".
14.1.1. Internal 2.5" SATA Drive
The KBox C-102-0 can be equipped with only one internal 2.5" SATA HDD/SSD (always factory installed).
The picture below shows the KBox C-102-0 configuration with the internal 2.5" SATA SSD (installed into the mounting
frame).
Figure 66: KBox C-102-0 - internal view with the internal HDD/SSD drive
1
Cover retaining bracket on the front side
2 LED indicators circuit
3 1x Mini PCIe socket for PCIe Mini card (please
observe the note below)
4 PCI x8 socket (not used in this configuration)
5 Screws that secure the internal 2.5" SATA
HDD/SSD into the mounting frame
6 Mounting frame for the 1x internal 2.5" SATA
HDD/SSD and screws that secure it to the chassis
7
Lower mounting bracket with key holes
The KBox C-102 provides two internal Mini PCIe sockets. You can see one of them in Figure
38, pos. 4.
The second Mini PCIe socket is on the bottom side of the baseboard and can be only at
factory equipped with an expansion card.
www.kontron.com
1
2
3
4
5
6
8 1x SATA cable connections (power and data)
9 Baseboard
10 2x mSATA sockets
11 Mechanical fixing assemblies for:
2x 2.5" mSATA SSD and 1x PCIe Mini card (two fixing
bolts for each mSATA SSD and PCIe Mini card) (please
observe the note below)
12 Cover retaining bracket on the rear side
13 Cooling fins
14 Upper mounting bracket with key holes
KBox C-102 - User Guide, Rev. 1.0
14
13
12
11
10
9
8
7
// 77
Advertisement
Table of Contents
