Optional Rtc Lithium Battery (Externally-Accessible); Figure 4: Lithium Battery Location (Shown With Protective Cover); Figure 5: Lithium Battery Location (Externally-Accessible Battery Shown With Removed Protective Cover) - Kontron KBox C-102 Series User Manual

4.2. Optional RTC Lithium Battery (externally-accessible)

Your KBox C-102 can be optionally equipped with an externally-accessible lithium battery (CMOS) (Figure 5, pos. 3).
The battery and the battery holder are covered by a protective cover (refer toFigure 4, pos. 1) secured by a Philips
countersunk head screw (Figure 4, pos. 2).
When replacing the lithium battery, please follow the corresponding instructions in the section 10.1 "Replacing the
Lithium Battery".
The protective cover of the KBox C-102 with externally-accessible lithium battery must
always be installed during transportation and operation activities.
The protective cover should be removed only when you attempt to replace the lithium
battery.
Figure 4: Lithium battery location (shown with protective
cover)
1
2 Philips countersunk head screw that secure the protective cover
3 Externally-accessible battery shown with removed protective
www.kontron.com
Protective cover for the lithium battery
at the front side of the chassis
cover
Figure 5: Lithium battery location (externally-accessible
battery shown with removed protective cover)
1
2
KBox C-102 - User Guide, Rev. 1.0
3
// 25