Table of Contents
Advertisement
4.7. Rear Side View
The KBox C-102 is designed for wall mounting, in vertical position inside of a control cabinet.
Please do not remove the red marked screws (see Figure 27, pos. 2 and pos. 4).
Please observe the mounting instructions included in the chapter 8/ "Installation Instructions ", and the outline
dimensions in the subsection 16.1 "Mechanical Specifications of the KBox C-102".
For the dimensions of the KBox C-102 versions with the optional fan expansion, refer to the subsection 16.1.4
"Mechanical Specifications of the KBox C-102-2 with Fan Tray Option" and 16.1.6 "Mechanical Specifications of the
KBox C-102-1 with Fan Tray Option".
Figure 27: Rear side of the KBox C-102-2 system
4.8. Functional Earth Stud
There is an M4 functional earth terminal on the lower mounting bracket of the KBox C-102 (Figure 27, pos. 6). This
terminal may be connected as required.
The KBox C-102 with the stud marked with a "Functional Earth" symbol (Figure 27) has to be
grounded to an appropriate "common earth" connection point.
www.kontron.com
1
2
5
4
3
6
1
Key holes on the upper mounting bracket
2 Screws that secure the upper mounting bracket of
the KBox C-102-2 and KBox C-102-1
(KBox C-102-0 has only 2 screws)
3 Key holes on the lower mounting bracket
4 Screws that secure the lower mounting bracket of
the KBox C-102-2 and KBox C-102-1
(KBox C-102-0 has only 2 screws)
5 Chassis rear
6 Functional Earth stud
KBox C-102 - User Guide, Rev. 1.0
// 37
Advertisement
Table of Contents
