Pci/Pcie Expansion Slots; Figure 19: Pcie 1 To Pcie 4 Slots (Shown As Detail Of A Kbox C-102-4) - Kontron KBox C-102 Series User Manual

4.4.11. PCI/PCIe Expansion Slots

The KBox C-102 provides on the front side up to four slots (see also Figure 57 for KBox C-102-4, Figure 59 for KBox C-
102-2 and Figure 61 for KBox C-102-1) for system expansion with PCI/PCIe expansion cards via corresponding riser
cards.
To access the corresponding riser card sockets, in order to install or remove PCI/PCIe expansion cards (refer to the
subsection 6.3.4 "Riser Cards Expansion Sockets for PCI/PCIe Cards"), you have to remove the top side access cover.
For a better accessibility of the expansion sockets you should remove the right side access cover (Figure 25 and
Figure 23, pos. 1 and pos. 3) also.

Figure 19: PCIe 1 to PCIe 4 slots (shown as detail of a KBox C-102-4)

1 2
Please observe that:
KBox C-102-4: supports up to:
KBox C-102-2: supports up to:
KBox C-102-1: supports 1x PCIe x4/PCIe x1 expansion card.
KBox C-102-0: can't be equipped with PCI/PCIe expansion cards. Refer to Figure 64 and
Figure 65.
Refer also to the area marked "C" in the section 4.4.
www.kontron.com
3 4
1 PCIe 1 slot
2 PCIe 2 slot
3 PCIe 3 slot
4 PCIe 4 slot
4x PCIe x4/PCIe x1 expansion cards
For system configuration refer to Figure 59, Figure 58 and for expansion cards
installation
refer to the subsection 6.3.5 "Installing/Removing PCI/PCIe Expansion Cards".
2x PCIe x4/PCIe x1 expansion cards or
1x PCIe x8/PCIe x4/PCIe x1 expansion cards or
1x PCIe x4/PCIe x1 and 1x PCI (32 bit) expansion cards.
For system configuration refer to Figure 59, Figure 60 and for expansion cards
installation
refer to the subsection 6.3.5 "Installing/Removing PCI/PCIe Expansion Cards".
For system configuration refer to Figure 61, Figure 62 and for expansion card
installation the subsection 13.1.1 "PCIe Expansion Slot 1".
KBox C-102 - User Guide, Rev. 1.0
// 33