18/ Standard Interfaces - Pin Assignments; X101) Power Input Connector; X102 As Eth 1 And X103 As Eth 2) Ethernet Connectors; Table 35: (X101) Power Input Connector - Kontron KBox C-102 Series User Manual

18/ Standard Interfaces – Pin Assignments
Low-active signals are indicated by a minus sign.

18.1.1. (X101) Power Input Connector

Table 41: (X101) Power Input Connector
Pin Signal Name
1 +24 VDC (input)
2 Ground
3 0V (input)

18.1.2. (X102 as ETH 1 and X103 as ETH 2) Ethernet Connectors

Table 42: (X102, X103) Ethernet Connectors
Pin Signal Name
1 MDI0+
2 MDI0-
3 MDI1+
4 MDI2+
5 MDI2-
6 MDI1-
7 MDI3+
8 MDI3-
Speed (Mbps)
10 off
100 green
1000 orange
www.kontron.com
3-pin POWER SUBCON (male)
X2, X3, X10LAN1, LAN2,LAN3 (RJ45)
LINK
on
on
on
KBox C-102 - User Guide, Rev. 1.0
LINK/ACT
ACTIVE
orange on (blinking)
orange on (blinking)
orange on (blinking)
// 136