X205 Or X206) Fieldbus; Figure 30: X205 Or X206 - Locations For The Optional Fieldbus Interface - Kontron KBox C-102 Series User Manual

5.4. (X205 or X206) Fieldbus

Your KBox C-102 can optionally be extended with a module for Fieldbus communication. Either a module for Profibus
or Profinet communication will be integrated. Depending on the Fieldbus choosen, the DSUB brake-out (X205) for
Profibus or the dual RJ45 brake-out (X206) for Profinet will be used.
Only one of these two Fieldbus interfaces (D-Sub or dual RJ45) can be ordered as optional
extension of your KBox C-102 system.
Figure 30: X205 or X206 – Locations for the optional FIELDBUS interface
www.kontron.com
The optional interface s (FIELDBUS) on the front side of the KBox C-102
must be ordered separately either as D-Sub (X206) or as dual RJ45 (X205)
connector. To add a FIELDBUS interface to the system, the second mPCIe
socket (on the bottom of the baseboard), will be used. This connection
can be implemented at factory only.
KBox C-102 - User Guide, Rev. 1.0
// 40