5/ System Extensions; Figure 28: Kbox C-102-4 Shown With Optional Interfaces And With Removable Drive Bays; Figure 29: Kbox C-102-4 Shown With Optional Interfaces And Without Removable Drive Bays - Kontron KBox C-102 Series User Manual

5/ System Extensions

Optionally your KBox C-102 can be equipped by factory only, with following ports and additional components:
 Serial port RS232 or RS422 via an adapter module
 CAN port: via an adapter module
 LDT3 or DisplayPort: via corresponding adapter module
 Fan Tray: an additional component connected to the KBox C-102-4, KBox C-102-2 and KBox C-102-1
 Fieldbus: (Profibus or Profinet): via internal factory mounted adapter module
You have to order these components separately, in order to extend your KBox C-102 at the factory.
Example of system configuration, see below:
Figure 28: KBox C-102-4 shown with optional interfaces
and with removable drive bays
1
2
3
4
5
www.kontron.com
1 Serial port RS232/RS422
2 CAN port
3 DisplayPort (DP 2)
(depending on the ordered option)
4 OR: LDT3 port
(depending on the ordered option)
5 Fieldbus (ProfiBus/ProfiNet etc.),
as D-Sub (X206) or dual RJ45 (X205)
(depending on the ordered option)
Figure 29: KBox C-102-4 shown with optional interfaces
and without removable drive bays
1
2
3
4
5
KBox C-102 - User Guide, Rev. 1.0
// 38