Kontron KBox C-102 Series User Manual page 99

Function Second level Sub-Screen / Description
PCI Express Extra Options>
Configuration>
(continued)
(continued)
SATA Controller(s)>
SATA and RST
Configuration>
SATA Mode Selection>
SATA Test Mode>
Software Feature Mask
Configuration>
Aggressive LPM
Support>
SATA Controller
Speed>
SATA0 – Drive 1>
or
SATA1 Drive 2
www.kontron.com
Prefetchable
Memory Alignment>
Enable/Disable SATA device
[Enabled, Disabled]
Determines SATA controllers operation
[AHCI, Intel RST Premium]
Test mode enable/disable (loop back)
[Enabled, Disabled]
HDD
Unlock>
LED
Locate>
Enable PCH to aggressively enter link power state
[Enabled, Disabled]
Displays the maximum support supported by SATA controller
[Default, Gen1, Gen2, Gen3]
Software Preserve>
Port>
>
Hot Plug>
Configured as eSATA>
Spin Up Device>
SATA Device Type>
SATA0 - Drive1
or
SATA1 – Drive 2
DevSlp>
DITO Configuration>
DITO Value>
DM Value>
Prefetchable memory alignments Range:(0-31)
bits
[1]
Enable indicates HDD password unlock in OS enabled.
[Enabled, Disabled]
Enable indicated that LED/SGPIO hardware is
attached and ping to locate feature is enabled in OS.
[Enabled, Disabled]
Read only field
Enable/Disbale SATA port
[Enabled, Disabled]
Designates port as Hot plug
[Enabled, Disabled]
Read only field
If enabled staggered spin-up is
performed and only drives with this
option enabled will spin up at boot.
Otherwise all drives spin up at boot spin
up device.
[Enabled, Disabled]
Identifies if SATA port is connected to a
solid-state drive or hard disk drive.
[Hard Disk Drive, Solid State Drive]
SATA Port# DevSlp
[Enabled, Disabled]
DITO configuration
[Enabled, Disabled]
Read only field
[625]
Read only field
[15]
KBox C-102 - User Guide, Rev. 1.0
// 99