System Expansion Capabilities; Pmc Module; Xmc Module; Rear I/O Module - Kontron CP6007-SA User Manual

1.2. System Expansion Capabilities

1.2.1.

PMC Module

The CP6007 has a 3.3 V, PMC mezzanine interface configurable for 64-bit / 66 MHz PCI operation. This interface
supports a wide range of PMC modules with PCI interface including all of Kontron's PMC modules and provides an
easy and flexible way to configure the CP6007 for various application requirements. For information on the PMC
interface, refer to Chapter 2.7.7, "PMC Interface".
1.2.2.

XMC Module

The CP6007 has one XMC mezzanine interface for support of x1, x4 and x8 PCI Express 2.0 XMC modules providing an
easy and flexible way to configure the CP6007 for various application requirements. For information on the XMC
interface, refer to Chapter 2.7.8, "XMC Interface".
1.2.3.

Rear I/O Module

The CP6007 provides support for one rear I/O module via the CompactPCI rear I/O connectors. For further information
refer to 2.7.10 "CompactPCI Interface".
1.2.4. M.2 Storage
CP6007 provides support for SATA/NVMe SSD Flash memory in combination with an optional M.2 storage device,
connected to a respective onboard connector. Market available M.2 devices of suitable size and keying currently
provide storage capacities of 32 GB up to 1 TB. For further information about the M.2 Flash module, refer to Chapter
2.7.6 "SATA Interfaces" and 2.7.7 "M.2 Socket".
www.kontron.com
CP6007-SA, CP6007-RA – User Guide, Rev. 1.0
// 15