Kontron KBox C-102 Series User Manual page 85

Sub-Screen Function
Intel ICC>
ICC Profile>
(continued)
Security Device
Trusted
Computing> Support>
Active PCR
Banks>
Available PCR
Banks>
SHA-1 PCR
Bank>
SHA256 PCR
Bank>
Pending
Operation>
Platform
Hierarchy>
Storage
Hierarchy>
Endorsement
Hierarchy>
TPM2.0 UEFI
Spec Version>
Physical
Presence Spec
Version>
TPM 20
InterfaceType>
Device Select>
ACPI settings> Enable ACPI
Auto
Configuration>
Enable
Hibernation>
ACPI Sleep
State>
www.kontron.com
Second level Sub-Screen / Description
Read only field
Specified the ICC profile
[0]
Enables or disables BIOS support for security device. Operating system
will not show security device. TCG EFI protocol and INT1A interface are not
available.
[Enabled, Disabled]
Read only field
Displays active PCR Banks [SHA-1,SHA256]
Read only field
Displays available PCR Banks [SHA-1,SHA256]
SHA-1 PCR Bank
[Enabled, Disabled]
SHA256 PCR Bank
[Enabled, Disabled]
Schedules operation for Security Device Note: Computer reboots on restart
in order to change the state of the security device.
[None, TPM Clear]
Platform Hierarchy
[Enabled, Disabled]
Storage Hierarchy
[Enabled, Disabled]
Endorsement Hierarchy
[Enabled, Disabled]
Selects TCG2 Spec Version support.
TCG_1_2 is compatible mode for Win8/Win10 and
TCG_2 supports TCG2 protocol + event format Win 10 or later.
[TCG_1_2, TCG_2]
Select to tell OS to support either PPI Spec 1.2 or 1.3
Note: Some HCK tests might not support 1.3.
[1.2, 1.3]
Read only field
[TIS]
BIOS support for security devices. Auto supports both TPM 1.2 and TPM
2.0. TPM 1.2 restricts support to TPM 1.2 devices and TPM 2.0 restricts
support to TPM 2.0. devices.
[TPM 1.2, TPM 2.0, Auto]
Enables or disables BIOS ACPI auto configuration. If enabled, the system
uses generic ACPI settings that may not fit the system best.
[Enabled, Disabled]
Enables or disables systems ability to hibernate (OS/S4 Sleep State)
This option may not be effective with some operating systems.
[Enabled, Disabled]
Selects highest ACPI sleep state that the system enters when SUSPEND
button is pressed
[Suspend Disabled, S3 (Suspend to Ram)]
KBox C-102 - User Guide, Rev. 1.0
// 85