Table of Contents
Advertisement
4.4.1. X101 - Power Input Connector
The 3-pin connector (X101, Figure 14 and Figure 59) provides the power connection of the KBox C-102 system to an
appropriate DC main power supply. For pin assignments refer to the subsection 18.1.1.
The external cable connector is a Phoenix PSC 1,5/ 3-M, 3-pin plug with an SCT-D-SUB 9-KG housing. This power plug
is delivered along with the KBox C-102. Please observe the section 9.1 "Connecting to DC Main Power Supply". The
mating connector is a Phoenix PSC 1,5/ 3-F connector.
Figure 14: X101 - 24VDC power input connector
4.4.2. X102/X103/X104 - Ethernet Connectors (ETH)
These connectors (X102/X103/X104, Figure 59, Figure 61 and Figure 64) are Gigabit Ethernet 10/100/1000 Mbit/s, IEEE
1588 capable interfaces. The connectors are standard 8-pin RJ45 type connectors with status LEDs:
Activity/link: green = link up; green blinking = activity.
Speed: off, green, yellow (10/100/1000 Mbit/s).
For pin assignment refer to subsection 18.1.2.
4.4.3. X105/X106 - USB 3.0
The KBox C-102 provides two USB 3.0/2.0 interfaces. These connectors (X105/X106, Figure 59, Figure 61 and Figure
64) allow connection of USB 3.0 or USB 2.0 compatible devices to the system.
For pin assignment refer to subsection.18.1.3.
4.4.4. X107/X108 - USB 2.0
The KBox C-102 provides two USB 2.0/1.1 interfaces. These connectors (X107/X108, Figure 59, Figure 61 and Figure 64)
allow connection of USB 2.0 or USB 1.1 compatible devices to the system.
For pin assignment refer to subsection 18.1.4.
4.4.5. X109 - DisplayPort
The KBox C-102 provides a DisplayPort compliant interface realised using a standard DisplayPort connector. An
external (digital) display can be connected to the DisplayPort connector (X109, Figure 59, Figure 61 and Figure 64).
For pin assignment refer to subsection 18.1.5.
www.kontron.com
Pin
Pin 1
1
2
Pin 2
3
Pin 3
Signal Name
+24 VDC (input)
Functional Earth
0V (input)
KBox C-102 - User Guide, Rev. 1.0
// 29
Advertisement
Table of Contents
