Kontron KBox C-102 Series User Manual page 94

Function Second level Sub-Screen / Description
Graphics IGD Configuration>
Configuration >
(continued)
(continued)
PEG Port PEG Configuration>
Configuration>
PEG 0:1:1 - PEG1 or
PEG 0:1:2 - PEG2
www.kontron.com
[200 Hz, 400 Hz, 1 kHz, 2 kHz, 4 kHz, 8kHz, 20 kHz,
40 KHz ]
Backlight Value> Sets LCD backlight brightness range: (0-255)
[128]
LVDS Clock Center Selects the LVDS clock frequency center
Spreading> spreading depth
[No Spreading, 0.5%, 1.0%, 1.5%, 2.0%, 2.5 %]
EFP1 Type> Integrated HDMI/DisplayPort configuration with
external connectors
[DisplayPort Only, DP with HDMI/DVI, HDMI/DVI]
EFP1 LSPCON> HDMI2.0 feature Level shifter/protocol converter
[Enabled, Disabled]
EFP2 Type> Integrated HDMI/DisplayPort configuration with
external connectors
[DisplayPort Only, DP with HDMI/DVI, HDMI/DVI]
EFP2 LSPCON> HDMI2.0 feature Level shifter/protocol converter
[Enabled, Disabled]
EFP3 Type> Integrated HDMI/DisplayPort configuration with
external connectors
[DisplayPort Only, DP with HDMI/DVI, HDMI/DVI]
EFP3 LSPCON> HDMI2.0 feature Level shifter/protocol converter
[Enabled, Disabled]
Mode Persistence> Mode persistence
[Enabled, Disabled]
Center Mode> Selects the display device that should be centered
[Disabled, EFP, EFP2]
Sets PEG configuration
[2x8, 1x8+2x4]
Enable Root Port> Enables or disables the root port
[Enabled, Disabled, Auto]
Max Link Speed> Configure PEG #:#:# maximum speed
[Auto, Gen1, Gen2, Gen3]
PEG1 Slot Power Sets power supply upper limit by slot. Power limit
Limit Value> (watts) is calculated by multiplying this value by
the Slot Power Limit scale. (0 - 255)
[75]
PEG1 Slot Power Selects scale used for the slot power limit value
Limit Scale>
[1.0x, 0.1x, 0.01x, 0.001X]
PEG0 Physical Slot Sets the port's slot number. This number must be
Number> globally unique within the chassis (0 - 8191).
PEG1 Hotplug> PCI Express Hotplug Enable/Disable
[Disabled, Enabled]
KBox C-102 - User Guide, Rev. 1.0
// 94