CPCI Backplane Preface List of Figures Kontron Modular Computers Slot Numbering (both 3U and 6U boards) ..4 Backplane Clock Assignment ................ 5 Bolt Terminal, M4 Screw, Faston/M4, and ATX Connectors ......8 Power Bar Connection ................... 8 DIN Type M and Positronic PCIH47 Female Connectors ......9 Backplane/Rack Coding Keys ...............11...
This document contains information proprietary to Kontron Modular Computers GmbH. It may not be copied or transmitted by any means, disclosed to others, or stored in any retrieval system or media without the prior written consent of Kontron Modular Computers GmbH or one of its authorized agents.
However, the life expectancy of your product can be drastically reduced by improper treatment during unpacking and installation. Therefore, in the interest of your own safety and of the correct operation of your new Kontron product, you are requested to conform with the following guidelines.
CPCI Backplane General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the device, which are not explicitly approved by Kontron Modular Computers GmbH and described in this manual or received from Kontron’s Technical Support as a special handling instruction, will void your warranty.
However, no other warran- YEAR LIMITED HARDWARE WARRANTY ties that may be granted or implied by anyone on behalf of Kontron are valid unless the con- sumer has the express written consent of Kontron Modular Computers GmbH.
General Overview The Kontron Modular Computers' backplane family includes both 3U and 6U form factor back- planes. 3U form factor backplanes are available with 2, 4, 5, 6, 8, and 11 slots. The 6U form factor backplanes are available with 4 and 8 slots.
CompactPCI backplanes providing more than 8 slots is possible. Distinctive Features The Kontron Modular Computers CompactPCI backplanes can be distinguished according to the following distinctive features: •...
The differences in the trace routing and net topologies contribute to skew and also define the longest clock delay. Particular attention is paid by the Kontron Modular Computers' system design to meet overall system clock skew requirements namely through simulation, testing, and qualification.
System integrators, however, must ensure that DC power supplies which com- ply 100% with the CompactPCI Power Interface Specification for connector pinout are not used with Kontron backplanes which use the DIN type M con- nector. Failure to comply with this warning may result in damage to your equipment.
Keys section of this chapter). Rear I/O Connectivity Rear I/O capability is a function of the individual backplane. Kontron Modular Computers pro- vides both 3U and 6U backplanes with rear I/O functionality. Refer to Table 3 for information regarding the rear I/O capability of Kontron’s backplanes. For the exact configuration (slots, connectors, and pinouts) of rear I/O backplanes refer to the appropriate backplane product doc- umentation.
General CPCI Backplane Kontron CompactPCI Standard Backplanes Table 2: Kontron CompactPCI Standard Backplane Family Form Factor Slots* Power Supply Connector Backplane Positronic PCIH47 (input) CP-ADAP-P47-PB (3U) – Power Bar (output) (power distribution adapter) Power Bar CP3-BP2-PB-RIO Power Bar CP3-BP4-PB-RIO Faston/M4 Screw...
Page 27
CPCI Backplane General Table 3: Kontron CompactPCI Standard Backplanes - Mechanical Characteristics Backplane Special Features Size Weight CP-ADAP-P47-PB (3U) Power distribution adapter 39.64*128.7 mm Rear I/O connectivity 39.64*128.7 mm 100g CP3-BP2-PB-RIO — 80.3*128.7 mm 170g CP3-BP4 CP3-BP4-M — 100.7*128.7 mm...
3. Specific Kontron CPCI Backplane Product Documentation (ID: 24229, Sub-ID: PDnn) Item 1 above is represented by this manual which provides generic information about Kontron’s CPCI backplanes. Item 2 is enclosed with this manual for referencing to applicable CPCI Back- plane Product Documentation.
Need help?
Do you have a question about the CP-ADAP-P47-PB (3U) and is the answer not in the manual?
Questions and answers