Function
Second level Sub-Screen / Description
Converter
Enable/Disable this USB physical connector (physical port). Once disabled, any USB devices
Displayport 2>
plugged into the connector will not be detected by BIOS or OS.
[Enabled, Disabled]
Serial IRQ Mode>
Configure serial IRQ mode
[Quiet, Continuous]
State After G3>
Specifies state to go to when power is re-applied after power failure (G3 State).
[S0 State, S5 State]
www.kontron.com
KBox C-102 - User Guide, Rev. 1.0
// 102