Kontron KBox C-102 Series User Manual page 35

4.4.12.1. Installing/Removing the removable HDD/SSD
To install/remove a removable drive, please perform the following steps:
1.
Pull out the lever (Figure 21, pos. 3) of the drive cover (Figure 20, pos. 2) and release it. (If required, unlock the
lever with the corresponding key before.)
2.
The drive bay cover will spring open and the removable drive will automatically slide out a bit.
3. Insert/remove the drive into/out from the bay receptacle.
4.
Close the cover.
www.kontron.com
KBox C-102 - User Guide, Rev. 1.0
// 35