Kontron KBox C-102 Series User Manual page 97

Function Second level Sub-Screen / Description
PCI Express
PCIe-USB Glitch
Configuration>
W/A
(continued)
PCIe Function
Swap
MiniPCIe J17 >
or
MiniPCIe J18>
www.kontron.com
For bad USB device(s) connected behind PCIE/PEG Port
[Enabled, Disabled]
If disables, prevents PCIE root port function swap. If any function other
than 0 is enabled, 0 will become visible.
th th
[Enabled, Disabled]
MiniPCIe J17> Controls the PCI Express root port.
[Enabled, Disabled]
Topology> Identifies the SATA Topology
[Unknown, x1, x4, SATA Express, M.2.]
ASPM> Sets ASPM level
[Auto, LOsL1, L1, LOs, Disabled]
L1 Substates> PCI Express L1 substrates settings.
[Disabled, L1.1, L1.2, L1.1 &L1.2]
Gen3 Eq Phase3 PCIe Gen3 Equalization phase 3 method
method>
[Hardware, Static Coeff., Software Search]
UPTP> Upstream Port Transmitter Preset
[5]
DPTP> Downstream Port Transmitter Preset
[7]
ACS> Access Control Service Extended Capability
[Enabled, Disabled]
URR> PCI Express unsupported request reporting
[Enabled, Disabled]
FER> PCI Express device fatal error reporting
[Enabled, Disabled]
NFER> PCI Express device non-fatal error reporting
[Enabled, Disabled]
CER> PCI Express device correction error reporting
[Enabled, Disabled]
CT0> PCIe Express Completion timer (T0)
[Enabled, Disabled]
SEFE> Root PCI Express System Error on Fatal Error
[Enabled, Disabled]
SENFE> Root PCI Express System Error on non-Fatal Error
[Enabled, Disabled]
SECE> Root PCI Express System Error on correctable
error
[Enabled, Disabled]
PME SCI> PCI Express PME SCI
[Enabled, Disabled]
Hot Plug> PCI Express hot plug
[Enabled, Disabled]
KBox C-102 - User Guide, Rev. 1.0
// 97