Table of Contents
Advertisement
User Guide
CP6005(X)-SA
1. 2 S y s te m E x p a n s i o n C a p a b i l i t i e s
1.2.1 PMC Module
The CP6005(X)-SA has a 3.3 V, PMC mezzanine interface configurable for 32-bit / 66 MHz PCI operation.
This interface supports a wide range of PMC modules with PCI interface including all of Kontron's PMC
modules and provides an easy and flexible way to configure the CP6005(X)-SA for various application
requirements. For information on the PMC interface, refer to Chapter 2.7.7, "PMC Interface".
1.2.2 XMC Module
The CP6005(X)-SA has one XMC mezzanine interface for support of x1, x4 and x8 PCI Express 2.0 XMC
modules providing an easy and flexible way to configure the CP6005(X)-SA for various application re-
quirements. For information on the XMC interface, refer to Chapter 2.7.8, "XMC Interface".
1.2.3 CP6005(X)-SA-MK2.5SATA Assembly Kit
The CP6005(X)-SA comes with an optional CP6005(X)-SA-MK2.5SATA assembly kit comprised of one
MMADP-SATA01 module and the necessary components needed for mounting the module on the
CP6005(X)-SA. The MMADP-SATA01 module is required for connecting an onboard 2.5" SATA HDD or
SSD to the CP6005(X)-SA via an onboard SATA extension connector. For further information concern-
ing the MMADP-SATA01 module, refer to Chapter 6.
1.2.4 SATA Flash Module
The CP6005(X)-SA provides support for up to 64 GB NAND flash memory in combination with an option-
al SATA Flash module, which is connected to the CP6005(X)-SA via an onboard SATA extension connec-
tor. For further information concerning the SATA Flash module, refer to Chapter 7.
1.2.5 Rear I/O Module
The CP6005(X)-SA provides support for one rear I/O module via the CompactPCI rear I/O connectors.
For further information about the compatibility of rear I/O modules with the CP6005(X)-SA, refer to
the CP6005(X)-SA datasheet.
www.kontron.com
12
Advertisement
Table of Contents
