2/ System Expansion Capabilities; Mmext05 Module With 8 Horizontal Pitches (Hp); Mmext-Xmc02 Module (8Hp); Cp-Rio3-04 Rear I/O Module (4Hp/8Hp) And Cp-Rio3-04S - Kontron CP3005-SA User Manual

Table of Contents

CP3005-SA – Rev. 0.6 Preliminary

2/ System Expansion Capabilities

The MMEXT05 module for the 8HP CP3005-SA version provides various I/O ports. On the front panel, it includes two

DisplayPort connectors, one Gigabit Ethernet port, one USB 3.0 port, and one RS-232 COM port. Onboard ports include

one SATA connector for SATA 2.5" HDD or SSD devices as well as a M.2 card socket. For further information about the

MMEXT05 module, refer to Chapter 7/.

The MMEXT-XMC02 module for the 8HP CP3005-SA version provides one XMC mezzanine interface for support of

one x8, x4 or x1 PCI Express 2.0 XMC module. Support of one XMC module with two x4 or x1 PCI Express 2.0 interfaces

is also provided upon request. In addition, the MMEXT-XMC02 module provides a M.2 socket for a SSD module (type:

2280).

For further information about the MMEXT-XMC02 module, refer to Chapter 8/.

The CP-RIO3-04 rear I/O module has been designed for use with the CP3005-SA board from Kontron and provides

comprehensive rear I/O functionality.

For further information about the CP-RIO3-04 rear I/O module with 4HP, refer to Chapter 9/.

For further information about the CP-RIO3-04 rear I/O module with 8HP, refer to Chapter 9/.

For further information about the CP-RIO3-04S rear I/O module, refer to Chapter 10/.

CP3005-SA provides support for SATA SSD Flash memory in combination with an optional M.2 storage device,

connected to a respective onboard connector. Market available M.2 devices of suitable size and keying currently

provide storage capacities of 32 GB up to 512 GB. The feature is available for 4HP as well as 8HP versions of CP3005-

SA. For further information about the SATA Flash module, refer to Chapter 11/.

www.kontron.com

// 16

Table of Contents