Table of Contents
Advertisement
4.5. Left and Right Side View
Figure 23: Right side of the KBox C-102 system
1
2
3
2
1
Top side access cover with knurled screws
2
10x screws that secure the right side access cover
3
Right side access cover
4
Upper mounting bracket with key holes
5
Lower mounting bracket with M4 ground stud and key holes
6
Cooling fins of the chassis
Please do not remove the red marked screws (see Figure 24, pos. 7 and pos. 8).
4.6. Top and Bottom Side View
Figure 25: Top side of the KBox C-102 system
4
6
When powering on the KBox C-102, make sure that the air intake and exhaust openings are
not obstructed. To provide sufficient heat dissipation for the cooling of the KBox C-102
system, never cover the cooling fins of the chassis. Do not place any objects onto the device.
www.kontron.com
Figure 24: Left side of the KBox C-102 system
4
6
7
9
5
7
Screws that secure the COMExpress
8
Screws that secure the cooling fins to the chassis
9
Type label
10 Hole for further system fan tray extension
11 Air intake openings on the bottom cover
12 Air exhaust openings on the top cover
Figure 26: Bottom side of the KBox C-102 system
6
12
10
1
KBox C-102 - User Guide, Rev. 1.0
1
8
7
8
®
module
1
11
5
// 36
Advertisement
Table of Contents
