Kontron KBox C-102 Series User Manual page 100

Function Second level Sub-Screen / Description
SATA and RST SATA0 – Drive 1>
Configuration>
or
(continued)
SATA1 Drive 2
(continued)
mSATA1 – J23>
or
mSATA2 J24>
USB XHCI Disable
Configuration> Compliance Mode>
xDCI Support>
USB Ports
X105 USB 3.0>
X106 USB 3.0>
X105 USB 2.0>
X106 USB 2.0>
X107 USB 2.0>
X108 USB 2.0>
Internal USB Ports
MiniPCIe J17>
MiniPCIe J18>
Security BIOS Lock>
Configuration>
www.kontron.com
>
Software Preserve>
Port>
Spin Up Device>
SATA Device Type>
mSATA1 DevSlp>
or mSATA2 DevSlp>
DITO Configuration>
DITO Value>
DM Value>
Option to disable compliance mode Default is false and
compliance mode is not disabled. True disables compliance mode
[False, True]
xDCI (USB OTG device)
[Enabled, Disabled]
Enable/Disable this USB physical connector (physical port). Once
disabled, any USB devices plugged into the connector will not be
detected by BIOS or OS.
[Disabled, Enabled]
Enable/Disable this USB physical connector (physical port). Once
disabled, any USB devices plugged into the connector will not be
detected by BIOS or OS.
[Disabled, Enabled]
Enables or disables PCH BIOS lock enable feature. Required to be
enabled to ensure SMM protection of flash.
[Enabled, Disabled]
KBox C-102 - User Guide, Rev. 1.0
Read only field
Enable/Disbale SATA port
[Enabled, Disabled]
If enabled staggered spin-up is
performed and only drives with this
option enabled will spin up at boot.
Otherwise all drives spin up at boot spin
up device.
[Enabled, Disabled]
Identifies if SATA port is connected to a
solid-state drive or hard disk drive.
[Hard Disk Drive, Solid State Drive]
SATA Port# DevSlp
[Enabled, Disabled]
DITO configuration
[Enabled, Disabled]
Read only field
[625]
Read only field
[15]
// 100