Table of Contents
Advertisement
6.3. Internal View
Figure 38: KBox C-102-2 - internal view (shown with a PCIe riser card and removable HDD/SSD drive bay)
1
2
3
4
5
6
7
1
Cover retaining bracket on the front side
2 LED indicators circuit
3 Screws that secure the PCIe slot brackets
4 1x Mini PCIe socket for PCIe Mini card (please
observe the note below)
5 PCI x8 socket of the baseboard
6 Riser card with 2x PCIe x4 sockets
7
Mounting frame for 2.5" drive bays of the
removable HDDs/SSDs
8 Lower mounting bracket with key holes
The KBox C-102 provides two internal Mini PCIe sockets. You can see one of them in Figure
38, pos. 4.
The second Mini PCIe socket is on the bottom side of the baseboard and can be only at
factory equipped with an expansion card.
www.kontron.com
9 SATA cable connections (power and data)
10 Baseboard
11 2x mSATA sockets
12 Mechanical fixing assemblies for:
2x 2.5" mSATA SSD and 1x PCIe Mini card (two fixing
bolts for each mSATA SSD and PCIe Mini card) (please
observe the note below)
13 Cover retaining bracket on the rear side
14 Cooling fins
15 Upper mounting bracket with key holes
KBox C-102 - User Guide, Rev. 1.0
15
14
13
12
11
10
9
8
// 47
Advertisement
Table of Contents
