Table of Contents
Advertisement
User Guide
CPS3003-SA
1. 2 S y s te m E x p a n s i o n C a p a b i l i t i e s
1.2.1 CPS3003-EXTIO Extension Module (8 HP)
The CPS3003-EXTIO module for the 8 HP CPS3003-SA version provides one USB 3.0 port, one COM port,
and one CFast socket on the front panel. For further information on the CPS3003-EXTIO extension mod-
ule, refer to Chapter 6.
1.2.2 CPS3003-BRIDGE Extension Module (9 HP)
The CPS3003-BRIDGE module for the 9 HP CPS3003-SA version provides one USB 3.0 port, one COM
port, and one CFast socket on the front panel. In addition, the CPS3003-BRIDGE module is equipped
with a PCI Express-to-PCI bridge which converts PCI Express signals into PCI signals and makes them
available on the CompactPCI interface. For further information on the CPS3003-BRIDGE extension
module, refer to Chapter 7.
1.2.3 CPS-RIO3-01 Rear Transition Module
The CPS-RIO3-01 rear transition module provides comprehensive rear I/O functionality, such as one
DisplayPort, two COM ports, two Gigabit Ethernet ports, one USB 3.0 port, and one USB 2.0 port. For
further information on the CPS-RIO3-01 rear transition module, refer to Chapter 8.
1.2.4 Smar t Extension Module
The Smart Extension Module can be used with the 4 HP CPS3003-SA and expands the onboard I/O ca-
pability providing one additional SATA cable connector as well as one USB 2.0 connector thereby facil-
itating the connection to system-internal USB and SATA devices. For further information on the Smart
Extension Module, refer to Chapter 9.
Note:
If a Smart Extension Module is installed on the CPS3003-SA, the board width exceeds 4 HP.
1.2.5 SATA Flash Module
The SATA Flash module can be used with the 4 HP CPS3003-SA and provides up to 32 GB of SLC NAND
flash memory. For further information on the SATA Flash module, refer to Chapter 10.
1. 3 B o a r d D i a g r a m s
The following diagrams provide additional information concerning board functionality and component
layout.
www.kontron.com
11
Advertisement
Table of Contents
