4.4.10. Status and General Purpose LEDs
After power is applied and the KBox C-102 performs the boot procedure, the LEDs show the POST code. In case of a
boot failure within the uEFI the last post code is displayed. When the boot phase is passed without errors, the LEDs
change to their status and general purpose function.
The following table provides information concerning these LEDs (Figure 59 and Figure 18).
Figure 18: Detail - Status and General Purpose LEDs
Table 4: Status and General Purpose LEDs
Status and General Purpose LEDs
Designator
Function
THERM
Thermal
DRIVE
Drives (SSD/HDD)
SD
SD Card
WD
Watchdog
GP1
General Purpose 1
GP2
General Purpose 2
GP3
General Purpose 3
GP4
General Purpose 4
www.kontron.com
Color
Description
Green
Normal operation
The system turns off due
Red blinking
to over temperature
Green
SSD/HDD active
Green
SD card active
Watchdog timeout
Red blinking
occurred
User general purpose 1
Red/Green/Orange
User general purpose 2
Red/Green/Orange
User general purpose 3
Red/Green/Orange
User general purpose 4
Red/Green/Orange
KBox C-102 - User Guide, Rev. 1.0
// 32