Kbox C-102-1 - System Expansion Capabilities; Pcie Expansion Slot 1; Figure 63: Inside Of The Kbox C-102-1 (Shown With A Removable Hdd) - Kontron KBox C-102 Series User Manual

Table of Contents

Advertisement

13.1. KBox C-102-1 - System Expansion Capabilities

Please observe that the KBox C-102-1 can be equipped with only one internal 2.5" SATA
HDD/SSD or one removable 2.5" SATA HDD/SSD.
Only the "PCIe 1" slot for one PCIe x4/PCIe x1 expansion card is available on the front side of
the system. Refer also to the subsection 7.4.
For system design refer also to Figure 61, Figure 62, chapter 18 "Technical Specifications"
and subsection 16.1.5 and 16.1.6.

13.1.1. PCIe Expansion Slot 1

The KBox C-102-1 provides at the front side one "PCIe 1" slot (Figure 61). You can install a half-length PCIe x4 or PCIe x1
expansion card. To access the PCIe x4 socket in order to install or remove the PCIe expansion card you have to
remove the top side access cover. For a better accessibility of the expansion socket you should remove the right side
access cover (Figure 25 and Figure 23, pos. 1 and pos. 3) also; (The description in the subsection 4.5 "Left and Right
Side View" is valid also for KBox C-102-1).

Figure 63: Inside of the KBox C-102-1 (shown with a removable HDD)

1
2
3
4
5
6
1
COM Express module
2 Baseboard
3 Mechanical fixing assemblies for 1x PCIe Mini card;
(two fixing bolts for each PCIe Mini card)
4 Installed removable 2.5" drive bay (not included)
5 Screw to secure the expansion slot/card bracket
6 Slot bracket for the for the PCIe 1 expansion slot
For installation/removing of the PCIe expansion card (installed into the "PCIe 1" slot) refer to the subsection 6.3.5
"Installing/Removing PCI/PCIe Expansion Cards", with observation that only one PCIe slot is available ("PCIe 1").
Please observe that for KBox C-102-1 only one PCIex4/PCIe x1 expansion card can be
installed into the available PCIe x4 socket of the riser card (Figure 63, pos. 11 and pos. 12).
www.kontron.com
7
Cooling fins
8 Upper mounting bracket with key holes
9 Mechanical fixing assemblies for 2x 2.5" mSATA
SSD (two fixing bolts for each mSATA SSD)
10 Cover retaining plate on the rear side
11 Riser card with 1x PCIe x4 expansion socket
12 Free PCIe x4 socket (for PCIe 1 slot)
KBox C-102 - User Guide, Rev. 1.0
7
8
9
10
11
12
// 73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kbox c-102-2Kbox c-102-1Kbox c-102-4Kbox c-102-0

Table of Contents