At+Qgdcnt Packet Data Counter - Quectel EC25 Command Manual

3
4
5
6
7

10.15. AT+QGDCNT Packet Data Counter

The command allows the application to check how much bytes are sent to or received by the module.
AT+QGDCNT Packet Data Counter
Test Command
AT+QGDCNT=?
Read Command
AT+QGDCNT?
Write Command
AT+QGDCNT=<op>
Maximum Response Time
Parameter
<op> A numeric parameter. The operation about data counter
0
1
If results need to be automatically saved, please refer to AT+QAUGDCNT command.
<bytes_sent> A numeric parameter. The amount of sent bytes.
<bytes_recv> A numeric parameter. The amount of received bytes.
NOTE
When module is powered on, <bytes_sent> and <bytes_recv> will be loaded from results of data
counter in NV. The default result in NV is 0.
EC25&EC21_AT_Commands_Manual
GSM W/EGPRS
UTRAN W/HSDPA
UTRAN W/HSUPA
UTRAN W/HSDPA and HSUPA
E-UTRAN
Response
+QGDCNT: (0,1)
OK
Response
+QGDCNT: <bytes_sent>,<bytes_recv>
OK
Response
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
300ms
Reset the data counter
Save the results of data counter to NV
LTE Module Series
EC25&EC21 AT Commands Manual
172 / 231