At+Icf Set Te-Ta Control Character Framing - Quectel EC25 Command Manual

NOTE
Flow control is only applicable for data mode.
Example
AT+IFC=2,2
OK
AT+IFC?
+IFC: 2,2
OK

3.4. AT+ICF Set TE-TA Control Character Framing

The command determines the serial interface character framing format and parity received by TA from TE.
AT+ICF Set TE-TA Control Character Framing
Test Command
AT+ICF=?
Read Command
AT+ICF?
Write Command
AT+ICF=[<format>,[<parity>]]
Maximum Response Time
Reference
V.25ter
Parameter
<format> 3
<parity> 0
1
EC25&EC21_AT_Commands_Manual
Response
+ICF: (list of supported <format>s),(list of supported
<parity>s)
OK
Response
+ICF: <format>,<parity>
OK
Response
This parameter setting determines the serial interface
character framing format and parity received by TA from TE.
OK
300ms
8 data 0 parity 1 stop
Odd
Even
EC25&EC21 AT Commands Manual
//Open the hardware flow control
LTE Module Series
33 / 231