At+Qcfg="Rrc" Rrc Release Version Configuration - Quectel EC25 Command Manual

Maximum Response Time
Parameter
<cat>

4.3.9. AT+QCFG="rrc" RRC Release Version Configuration

The command specifies the RRC release version. This configuration is valid only after the module is
restarted.
AT+QCFG="rrc" RRC Release Version Configuration
Write Command
AT+QCFG="rrc"[,<rrcr>]
Maximum Response Time
Parameter
<rrcr>
EC25&EC21_AT_Commands_Manual
OK
If <cat> is not omitted, configure the HSUPA category:
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
300ms
HSUPA category
5 Category 5
6 Category 6
Response
If <rrcr> is omitted, return the current configuration:
+QCFG: "rrc",<rrcr>
OK
If <rrcr> is not omitted, configure the RRC release version:
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
300ms
RRC release version.
0 R99
LTE Module Series
EC25&EC21 AT Commands Manual
47 / 231