At+Cmss Send Message From Storage - Quectel EC25 Command Manual

OK

9.11. AT+CMSS Send Message from Storage

The Write Command sends messages with location value <index> from message storage <mem2> to
the network. If a new recipient address <da> is given for SMS-SUBMIT, it shall be used instead of the one
stored with the message.
AT+CMSS Send Message from Storage
Test Command
AT+CMSS=?
Write Command
AT+CMSS=<index>[,<da>[,<toda>]]
Maximum Response Time
Reference
3GPP TS 27.005
Parameter
<index> Integer type value in the range of location numbers supported by the associated
memory.
<da> Destination Address. 3GPP TS 23.040 TP-Destination-Address Address-Value field in
string format. BCD numbers (or GSM 7 bit default alphabet characters) are
EC25&EC21_AT_Commands_Manual
Response
OK
Response
TA sends message with location value <index> from
message storage <mem2> to the network (SMS-SUBMIT). If
new recipient address <da> is given, it shall be used instead
of the one stored with the message. Reference value <mr> is
returned to the TE on successful message delivery. Values
can be used to identify message upon unsolicited delivery
status report result code.
If in text mode (AT+CMGF=1) and sent successfully:
+CMSS: <mr>[,<scts>]
OK
If in PDU mode (AT+CMGF=0) and sent successfully:
+CMSS: <mr> [,<ackpdu>]
OK
If there is any error related to ME functionality:
+CMS ERROR: <err>
120s, determined by network.
LTE Module Series
EC25&EC21 AT Commands Manual
134 / 231