At+Qcfg="Hsdpacat" Hsdpa Category Configuration; At+Qcfg="Hsupacat" Hsupa Category Configuration - Quectel EC25 Command Manual

4.3.7. AT+QCFG="hsdpacat" HSDPA Category Configuration

The command specifies the HSDPA category. This configuration is valid only after the module is restarted.
AT+QCFG="hsdpacat" HSDPA Category Configuration
Write Command
AT+QCFG="hsdpacat"[,<cat>]
Maximum Response Time
Parameter
<cat> HSDPA category
6
8
10
12
14
18
20
24

4.3.8. AT+QCFG="hsupacat" HSUPA Category Configuration

The command specifies the HSUPA category. This configuration is valid only after the module is restarted.
AT+QCFG="hsupacat" HSUPA Category Configuration
Write Command
AT+QCFG="hsupacat"[,<cat>]
EC25&EC21_AT_Commands_Manual
1 Take effect immediately
Response
If <cat> is omitted, return the current configuration:
+QCFG: "hsdpacat",<cat>
OK
If <cat> is not omitted, configure the HSDPA category:
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
300ms
Category 6
Category 8
Category 10
Category 12
Category 14
Category 18
Category 20
Category 24
Response
If <cat> is omitted, return the current configuration:
+QCFG: "hsupacat",<cat>
LTE Module Series
EC25&EC21 AT Commands Manual
46 / 231