At+Cpin Enter Pin - Quectel EC25 Command Manual

OK

5.3. AT+CPIN Enter PIN

The command is used to enter a password or query whether or not the module requires a password which
is necessary before it can be operated. The password may be (U)SIM PIN, (U)SIM PUK, PH-SIM PIN,
etc.
AT+CPIN Enter PIN
Test Command
AT+CPIN=?
Read Command
AT+CPIN?
Write Command
AT+CPIN=<pin>[,<new_pin>]
Maximum Response Time
Reference
3GPP TS 27.007
Parameter
<code> READY
SIM PIN
SIM PUK
SIM PIN2
SIM PUK2
PH-NET PIN
PH-NET PUK
EC25&EC21_AT_Commands_Manual
Response
OK
Response
TA returns an alphanumeric string indicating whether or not
some password is required.
+CPIN: <code>
OK
Response
TA stores a password, such as (U)SIM PIN, (U)SIM PUK, etc.,
which is necessary before it can be operated. If the PIN is to
be entered twice, the TA shall automatically repeat the PIN. If
no PIN request is pending, no action is taken and an error
message +CME ERROR is returned to TE.
If the PIN required is (U)SIM PUK or (U)SIM PUK2, the
second pin is required. This second pin <new_pin> is used to
replace the old pin in the (U)SIM.
OK
5s
MT is not pending for any password
MT is waiting for SIM PIN to be given
MT is waiting for SIM PUK to be given
MT is waiting for SIM PIN2 to be given
MT is waiting for SIM PUK2 to be given
MT is waiting for network personalization password to be given
MT is waiting for network personalization unblocking password
LTE Module Series
EC25&EC21 AT Commands Manual
63 / 231