Quectel EC25 Command Manual page 76

Maximum Response Time
Reference
3GPP TS 27.007
Parameter
<stat> 0
1
2
3
<oper> Operator in format as per <mode>
<mode> 0
1
2
3
4
<format> 0
1
2
<Act> Access technology selected. Values 3, 4, 5 and 6 occur only in the response of Read
Command while MS is in data service state and is not intended for the AT+COPS Write
Command.
0
2
3
4
5
6
7
100
EC25&EC21_AT_Commands_Manual
Command (AT+COPS?).
OK
If there is any error related to ME functionality:
+CME ERROR: <err>
180s, determined by network.
Unknown
Operator available
Current operator
Operator forbidden
Automatic mode. <oper> field is ignored
Manual operator selection. <oper> field shall be present and <Act> optionally
Manually deregister from network
Set only <format> (for AT+COPS? Read Command), and do not attempt
registration/deregistration (<oper> and <Act> fields are ignored). This value is
invalid in the response of Read Command.
Manual/automatic selection. <oper> field shall be presented. If manual selection
fails, automatic mode (<mode>=0) is entered
Long format alphanumeric <oper> which can be up to 16 characters long
Short format alphanumeric <oper>
Numeric <oper>. GSM location area identification number
GSM
UTRAN
GSM W/EGPRS
UTRAN W/HSDPA
UTRAN W/HSUPA
UTRAN W/HSDPA and HSUPA
E-UTRAN
CDMA
LTE Module Series
EC25&EC21 AT Commands Manual
75 / 231