Supplementary Service Commands; At+Ccfc Call Forwarding Number And Conditions Control - Quectel EC25 Command Manual

11

Supplementary Service Commands

11.1. AT+CCFC Call Forwarding Number and Conditions Control

The command allows control of the call forwarding supplementary service according to 3GPP TS 22.082.
Registration, erasure, activation, deactivation and status query are supported.
AT+CCFC Call Forwarding Number and Conditions Control
Test Command
AT+CCFC=?
Write Command
AT+CCFC=<reads>,<mode>[,<numbe
r>[,<type>[,<class>[,<subaddr>[,<sat
ype>[,time]]]]]]
EC25&EC21_AT_Commands_Manual
Response
+CCFC: (list of supported <reads>s)
OK
Response
TA controls the call forwarding supplementary service.
Registration, erasure, activation, deactivation, and status
query are supported.
Only <reads> and <mode> should be entered with mode
(0-2,4)
If <mode> is not equal to 2 and the command is executed
successfully:
OK
If <mode>=2 and the command is executed successfully
(only in connection with <reads> 0-3):
For registered call forwarding numbers:
+CCFC:
<status>,<class1>[,<number>,<type>[,<subaddr>,<satyp
e>[,<time>]]] [<CR><LF>+CCFC: ....]
OK
If no call forwarding numbers are registered (and therefore all
classes are inactive):
+CCFC: <status>,<class>
OK
LTE Module Series
EC25&EC21 AT Commands Manual
175 / 231