At+Qcmgr Read Concatenated Messages - Quectel EC25 Command Manual

9.18. AT+QCMGR Read Concatenated Messages

The function of this command is similar to AT+CMGR, except that the message to be read is a segment of
concatenated messages, and parameters <uid>, <msg_seg> and <msg_total> would be shown in the
result. Several segments should be concatenated to a whole concatenated message according to these
three parameters. Similar to AT+QCMGS, AT+QCMGR is only used in text mode (AT+CMGF=1).
AT+QCMGR Read Concatenated Messages
Test Command
AT+QCMGR=?
Write Command
AT+QCMGR=<index>
Maximum Response Time
EC25&EC21_AT_Commands_Manual
Response
OK
Response
If in text mode (AT+CMGF=1) and command is executed
successfully:
For SMS-DELIVER:
+QCMGR:
<stat>,<oa>,[<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<
sca>,<tosca>,<length>][,<uid>,<msg_seg>,<msg_total>]
<CR><LF><data>
OK
For SMS-SUBMIT:
+QCMGR:
<stat>,<da>,[<alpha>][,<toda>,<fo>,<pid>,<dcs>,[<vp>],<
sca>,<tosca>,<length>][,<uid>,<msg_seg>,<msg_total>]
<CR><LF><data>
OK
For SMS-STATUS-REPORTs:
+QCMGR:
<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
OK
For SMS-COMMANDs:
+QCMGR:
<stat>,<fo>,<ct>[,<pid>,[<mn>],[<da>],[<toda>],<length><
CR><LF><cdata>]
OK
Else, If there is any error related to ME functionality:
+CMS ERROR: <err>
Depends on the length of message content.
LTE Module Series
EC25&EC21 AT Commands Manual
144 / 231