2.14. ATQ Set Result Code Presentation Mode
The command controls whether the result code is transmitted to the TE. Other information text transmitted
as response is not affected.
ATQ Set Result Code Presentation Mode
Execution Command
ATQ<n>
Maximum Response Time
Reference
V.25ter
Parameter
<n>
0
1
2.15. ATV TA Response Format
The command determines the contents of header and trailer transmitted with AT command result codes
and information responses.
The result codes, their numeric equivalents and brief descriptions of the use of each are listed in the
following table.
ATV TA Response Format
Execution Command
ATV<value>
EC25&EC21_AT_Commands_Manual
Response
This parameter setting determines whether or not the TA
transmits any result code to the TE. Information text
transmitted in response is not affected by this setting.
If <n>=0:
OK
If <n>=1:
(none)
300ms
TA transmits result code
Result codes are suppressed and not transmitted
Response
This parameter setting determines the contents of the header
and trailer transmitted with result codes and information
responses.
When <value>=0
0
When <value>=1
OK
LTE Module Series
EC25&EC21 AT Commands Manual
20 / 231