At+Cgerep Packet Domain Event Reporting - Quectel EC25 Command Manual

10.12. AT+CGEREP Packet Domain Event Reporting

The Write Command enables or disables sending of unsolicited result codes +CGEV: XXX from MT to TE
in the case of certain events occurring in the Packet Domain MT or the network. <mode> controls the
processing of unsolicited result codes specified within this command. <bfr> controls the effect on buffered
codes when <mode> 1 or 2 is entered.
AT+CGEREP Packet Domain Event Reporting
Test Command
AT+CGEREP=?
Read Command
AT+CGEREP?
Write Command
AT+CGEREP=mode[,<bfr>]
Execution Command
AT+CGEREP
Maximum Response Time
Reference
3GPP TS 27.007
Parameter
<mode> 0
1
2
<bfr> 0
1
EC25&EC21_AT_Commands_Manual
Response
+CGEREP: (list of supported <mode>s),(list of supported
<bfr>s)
OK
Response
+CGEREP: <mode>,<bfr>
OK
Response
OK
ERROR
Response
OK
300ms
Buffer unsolicited result codes in the MT; if MT result code buffer is full, the oldest
ones can be discarded. No codes are forwarded to the TE.
Discard unsolicited result codes when MT-TE link is reserved (e.g. in on-line data
mode), otherwise forward them directly to the TE.
Buffer unsolicited result codes in the MT when MT-TE link is reserved (e.g. in
on-line data mode) and flush them to the TE when MT-TE link becomes available.
Otherwise forward them directly to the TE.
MT buffer of unsolicited result codes defined within this command is cleared when
<mode> 1 or 2 is entered.
MT buffer of unsolicited result codes defined within this command is flushed to the
TE when <mode> 1 or 2 is entered (OK response shall be given before flushing
the codes).
LTE Module Series
EC25&EC21 AT Commands Manual
168 / 231