At+Qmic Set Uplink Gains Of Mic - Quectel EC25 Command Manual
Lte module series, at commands
Hide thumbs
Also See for EC25:
- User manual (71 pages) ,
- Reference design (15 pages) ,
- Hardware design (43 pages)
Table of Contents
Advertisement
Reference
Quectel
Parameter
<st_gain>
Numeric type. Indicates the configured side tone gain in current mode
Range: 0-65535. Default value might be different in different audio modes
NOTE
This parameter will not be saved.
12.10. AT+QMIC Set Uplink Gains of MIC
The command is used to set the uplink gains of microphone.
AT+QMIC Set Uplink Gains of MIC
Test Command
AT+QMIC=?
Read Command
AT+QMIC?
Write Command
AT+QMIC=<txgain>[,<txdgain>]
Maximum Response Time
Parameter
<txgain>
Numeric type. Indicates uplink codec gain and the range is 0-65535. The default value might
be different in different audio modes.
<txdgain>
Numeric type. Indicates uplink digital gain and the range is 0-65535. The default value might
be different in different audio modes.
EC25&EC21_AT_Commands_Manual
Response
+QMIC: (0-65535),(0-65535)
OK
Response
+QMIC: <txgain>,<txdgain>
OK
Response
OK
ERROR
300ms
LTE Module Series
EC25&EC21 AT Commands Manual
197 / 231
Advertisement
Table of Contents
